Pavements and driveways are crucial components of the business's infrastructure. However, you have to be careful when choosing a paving material and installation method since it determines the results and longevity of the surface.
One way to pave your driveway and parking area is by using foam bitumen stabilisation. The method involves a mixture of air, water and bitumen as the primary binding agent. The process improves the strength of the granular materials and creates a flexible pavement. Here are the three main benefits you will accrue from foam bitumen stabilisation.
1. You Experience a Simpler Process
Traditional paving methods are time-consuming and complex. They involve removing the entire sub-base and replacing it with a new one. Moreover, the conventional techniques involve getting new aggregate and mixing it, which might cost a lot.
On the other hand, stabilisation is a better method because the contractor pours hot bitumen on the damaged part of the pavement. They then run a compactor over the bitumen and drive it deep into the asphalt. Naturally, the hot and viscous bitumen fills the holes created when the asphalt gets damaged, creating a sealed and level pavement.
2. You Avoid Stalling Your Business
Road and pavement repairs come with plenty of inconveniences. First, you might have to shut down the road for several days as the repairs go on. Second, the pavement needs time to cure and stabilise after the completion of the repair. These disruptions can have a massive effect on your business, like lowering the number of customers you serve per day.
Choosing foam bitumen can help you evade these inconveniences. The repair process will take as little as one day. Curing the material is also faster and effective. Because of that, car traffic can resume as soon as the repaired sections dry off, minimising business loss.
3. Your Pavement Gets Stronger
Another immense benefit that comes with stabilisation is that your pavement becomes stronger. That is because foam bitumen reduces your pavement susceptibility to moisture. Remember that moisture is one of the factors that damage pavements, and by sealing it out, you increase your pavement's life. Also, note that when the foam bitumen melts, it flows into all cavities in the sub-layers of the pavement and locks any gaps where moisture can get through.
Bitumen stabilisation can help you solve many issues, including potholes, alligator cracks and other weaknesses on your pavements. Therefore, you should ask your contractor to apply the method to ensure an excellent outcome.